With LCD Display Kit	Without LCD Display Kit

ioLogik E2210 remote I/O server is designed to read and control the on/off status of devices over an Ethernet network from a host computer. Remote monitoring is an important tool for factory automation, environmental monitoring, and building automation systems.

ioLogik E2210 is the easiest to use remote I/O server for industrial IT system integration. It provides a great deal of flexibility, but is still powerful enough for modern automation applications. For example, ioLogik E2210 is being used in an advanced RFID-based baggage tracking system. Its fast response time over Ethernet and high performance lets system integrators improve the overall performance of their system.

Key Features:

UC-7112, which is the new star of MOXA's mini embedded computer series, will be ready to ship on May 22.

Overview
UC-7112 features dual 10/100 Mbps Ethernet ports and two RS-232/422/485 serial ports in a built-in µClinux ARM9 box. In addition, UC-7112 provides an internal SD socket for storage expansion. To access the slot, you must first remove the product's outer cover, providing better protection of your important data. By adding the popular Secure Digital Memory Card (SD), UC-7112 can provide 2 GB or more of storage space. UC-7112 offers high performance communication and unlimited storage in a super compact, palm-size box. UC-7112 is the right solution for applications that use a lot of memory, but that must be housed in a small physical space without sacrificing performance.

Powerful MOXA ART ARM9 32-bit RISC Processor
UC-7112 is an ARM9-based embedded computer that uses the MOXA ART ARM9 32-bit RISC processor as the system engine. Unlike a general RISC processor, the MOXA ART ARM9 processor offers superior performance for serial communication and network processing with a CPU that runs at 192 MHz. The processor's built-in UARTs enable serial communication at over 700 Kbps (maximum speed of 921.6 Kbps), and truly fulfill the high performance communication demand of industrial applications.

Unlimited Storage Expansion Capability
UC-7112 has 8 MB of NOR Flash ROM and 16 MB of SDRAM onboard, which is enough storage capacity to store the operating system, device drivers, and the user's own software. For large storage requirements, the additional internal SD socket provides users with flexible unlimited storage expansion by adding the popular SD memory card to run applications.

Open Linux Architecture for Easy Development
The pre-installed Ready-to-Run µClinux OS, based on the Linux kernel 2.6.9, provides an open software operating system for your software program development. The OS and middleware-ready environment are built in to speed up embedded application development. In addition to serial communication and a TCP/IP library, this mini size OS kernel also supports dynamic driver module functionality to allow the loading and unloading of customized driver modules. To develop applications on UC-7112, the user must use a standard GNU GCC compiler or MOXA Linux Tool Chain, which is available on the software CD. This means that software written for a desktop PC can be easily ported to UC-7112. You will not need to spend time modifying existing software code.

Value Added Network Services
For diversified network-centric embedded applications, UC-7112 not only provides powerful communication capability, but also embeds several useful network services and functions. It includes 3 network daemons—Telnet Server, FTP Server and Web Server, dial-in/out functions such as PPP, PPPoE, and the firewall capability of IPTBLES/NAT. These common and easy-to-use services make it easy for users to migrate industrial communication applications to the UC-7112 embedded computer.

Key Features:

TCC-80	TCC-82

TCC-80 is a serial port powered RS-232 to RS-422/485 media converter that can be operated without additional power input, but comes equipped with a VDC power adapter and a USB port power cord when needed.

TCC-80 not only offers complete signal conversion between RS-232 and RS-422/485 signals, but also provides comprehensive protection against current overload with its built-in 15 KV ESD surge protector. In addition, TCC-80 is designed to provide RS-485 auto data direction control, in which the RS-485 driver is enabled automatically when the circuitry senses the TxD output from the RS-232 signal. No programming effort is needed to control the transmission direction of the RS-485 signal.

TCC-82 is a 4-channel RS-232 optical isolator that provides bi-directional serial communication with full electrical isolation between two RS-232 devices.

This compact sized isolator isolates both sides of the connection optically to provide perfect protection from lightning surges, accidental high voltage shorts, and ground loops. The built-in, wide-range optocouplers can withstand more than 4 KV rms input to output for 1 minute. By supporting this feature, TCC-82 not only meets the requirements for general data communications, but also the high standard needed for industrial automation and medical applications. Moreover, TCC-82 protects the RTS/CTS handshake lines on its two D-type connectors, and supports power-over-serial, which eliminates the need for an external power supply.

PCI Express Board Features:

• PCI Express x1 compliant
• Serial communication speed up to 921.6 Kbps
• 128-byte FIFO and on-chip H/W, S/W flow control
• 8-port RS-232/422/485 board (CP-118EL), 8-port RS-232 board (CP-168EL), and 4-port RS-232 board (CP-104EL)
• DOS, Windows 2003/XP/2000, Linux, SCO Unix driver support
• Support for Windows and Linux 32-bit/64-bit platforms
• Easy maintenance with on-board LED display and management software
• Low profile board for compact-sized PCs
• On-board 15 KV ESD protection

Model	Serial Interface	No. of Ports	Shipping Date
CP-118EL	RS-232/422/485	8	May 19
CP-168EL	RS-232	8	May 19
CP-104EL	RS-232	4	May 19
OPT8I	RS-422/485	8	May 18

Moxa EDS-316 Series is an economical solution for your industrial Ethernet connections. EDS-316 is equipped with 14 10/100BaseT(X) ports and 2 module ports that can be changed to various kinds of connectors. With its high performance and flexible industrial design, EDS-316 is suitable for industrial Ethernet applications, such as Building Automation, Machine Automation, and Factory Automation fields.

The EDS-316 series has twenty models to fulfill customers’ varied requirements. All models have a built-in relay warning function that alerts operators when power failures or port breaks occur. The wide operating temperature range (-40 to 75°C) and DIN-Rail mounting ability make the plug-and-play EDS-316 Ethernet switch suitable for all industrial Ethernet applications.

Key Features:

• 10/100BaseT(X) (RJ45), 100BaseFX (Multi mode, SC/ST connector)
• Supports IEEE802.3/802.3u/802.3x
• Operating temperature from 0 to 60°C, or from -40 to 75°C for wide operating temperature models
• Relay output warning for power failure and port break alarm
• Broadcast storm protection
• Redundant dual 24 VDC power inputs
• DIN-Rail or panel mounting ability

The new industrial 16-port Ethernet switch, EDS-316 Series, will be available in May. For more product details and ordering information, please visit Moxa's website at www.moxa.com/product/EDS-316.htm.